Inserting growing clips into playlists, Display, 6 inserting growing clips into playlists – EVS MulticamLSM Version 11.00 Operating Manual User Manual

Page 113

Advertising

Multicam - Version 11.00 – Operating Manual

EVS Broadcast Equipment SA – April 2012

Issue

11.00.C

103

To insert one or more clips from a search result at the end of the current playlist, proceed

as follows:
1. From the main menu, activate the current playlist as explained in the section 11.4.2

‘How to Set a Current Playlist’, on page 91

2. Press

MENU+C to enter the Search mode:

Enter the search criteria as explained in the section 10.5 ‘Searching the Database

Using the Remote Panel’, on page 84.

3. Launch the search on the local server or on the whole network by pressing

respectively the

C (Srch Loc) or D (Srch Net) keys on the Remote Panel.

4. Do one of the following:

a. To insert only one clip into the playlist, browse to the clip and press the

INSERT

key on the Remote Panel.

b. To insert all clips returned in the search result, press the

SHIFT+INSERT keys on

the Remote Panel.

The clip(s) are inserted at the end of the current playlist.

11.10.6

Inserting Growing Clips into Playlists

Growing clips can be inserted in playlists in the same way as other clips. However, their

display has the following characteristics:

Display

They will be displayed with the ‘Creating’ message in the playlist on the VGA.
The growing clips ID will be blinking on the mini playlist display and on the playlist screen

on the Remote Panel, as well as on the OSD.

keyword89012

2 keyword89012

keyword89012

F1:action_1 F6:action_6

F2:action_2 F7:action_7

F3:action_3 F8:action_8

F4:action_4 F9:Prev.page

p.01

F5:action_5 F0:Next page

Reset