EVS MulticamLSM Version 11.00 Operating Manual - Manual (Page 157)

Multicam - Version 11.00 – Operating Manual
EVS Broadcast Equipment SA – April 2012
Issue
11.00.C
147
13. Operating on XNet Network
13.1 Introduction
The XNet Network is set up in the EVS application. For more information, on how to set
up the XNet Network and connect to the XNet network, refer to the section ‘XNet SDTI
Network’ in the Multicam Configuration manual and to the XT Tech Ref Software manual.
13.2 Disconnecting from XNet
When you work on the XNet Network and exit Multicam, the system checks if other
systems are still connected to your server.
In this case, the following message appears:
Other users are connected to your LSM
on XNet network. Are you really sure that
you want to close the Multicam application ?
[ESC] =CANCEL [ENTER]=YES
Press ESC to cancel the command and return to the application.
Press ENTER to exit the Multicam application.
13.3 Selecting a Server on XNet
Selecting the NETWORK key (SHIFT+PLAY on the Remote) displays the Network menu:
The LCD screen of the Remote displays the complete list of available systems on the
network. The list is organized by the order of connection to the network. Up to 4 pages
are available to display up to 31 servers.
The
PREVIOUS and NEXT keys appear only when some machines are not visible on the
current page.
Select a LSM on XNET Page 1/4
F1 MICHEL F6 MACHINE6
F2 PIERRE F7 MACHINE7
F3 PAUL F8 MACHINE8
F4 JACQUES F9 MACHINE9
F5 ANDRE (LOCAL) F0 MACHINE0
Previous Next
Local Clips Records Clip+Rec