Help windows – Xylem IM043 AQUAVAR Variable Speed Pump Control User Manual
Page 68
67
Help Windows
Window text
Help Text
Window
Pressure window
4%
Ramp Hysteresis
Hysteresis
50%
Ramp 1
Ramp 1: fast acceleration time
4.0 Sec
Ramp 2
Ramp 2: fast deceleration time
4.0 Sec.
Ramp 3
Ramp 3: slow acceleration time
50%
Ramp 4
Ramp 4: slow deceleration time
50%
Max. Frequency
Maximum output frequency
60.0 Hz
range: 6 - 60 Hz
Min. Frequency
Minimum output frequency
0.0 Hz
(range: 0 - max. frequency)
Config. FMin
Configuration behavior at
f->0
minimum frequency
Stop-Delay Time
Delay for pump stop when
0 Sec.
f->0 is chosen
Boost
Boost, voltage boost applied on start-up
5.0%
and shutdown.
Sensor Adjust?
Sensor zero adjustment (press + )
Out of Range
Sensor Curve
Sensor characteristic curve
Sensor Range
Normalize to max. Sensor Value
20mA = 25.0 bar (362.6 PSI)
Mode:
Mode: controller > pressure control;
Controller
Actuator > frequency set point as ADC Value
Multicontroller > control of up to 4 pumps
t
t