Teledyne 6400EH - Sulfur Dioxide Analyzer - Manual (Page 17)

UV Fluorescence SO2 Analyzer Specifications/Warranty
Teledyne Analytical Instruments 5
Specifications, Approvals & Warranty
2.1. Specifications
Table 2-1: Model 6400EH Basic Unit Specifications
Min/Max Range
(Physical Analog Output) In 1 ppb increments from 10ppm to 5,000 ppm, dual
ranges or auto ranging
Measurement Units ppm, mg/m3 (user selectable)
Zero Noise 1 0.05 ppm rms
Span Noise 1 < 0.5% of reading (above 50 ppm)
Lower Detectable Limit 2 0.1 ppm rms
Zero Drift (24 hours) < 1 ppm
Zero Drift (7 days) < 2 ppm
Span Drift (7 Days) < 0.5% FS
Linearity 1 % of full scale
Precision 0.5% of reading
1
Temperature Coefficient < 0.1% per
o
C
Voltage Coefficient < 0.05% per V
Lag Time 1 5 sec
Rise/Fall Time 1 95% in < 30 sec
Sample Flow Rate 700 cm 3 /min. ±10%
Temperature Range 5-40
o
C
Humidity Range 0 - 95% RH, non-condensing
Dimensions H x W x D 7" x 17" x 23.5" (178 mm x 432 mm x 597 mm)
Weight, Analyzer
(Basic Configuration)
45 lbs (20.5 kg) w/internal pump
Weight, Pump Pack 16 lbs (7 kg)
AC Power Rating
100 V, 50/60 Hz (3.25A); 115 V, 60 Hz (3.0 A);
220 – 240 V, 50/60 Hz (2.5 A)
Environmental
Installation category (over-voltage category) II; Pollution
degree 2
Analog Outputs Three (3) Outputs