Teledyne 6400EH - Sulfur Dioxide Analyzer - Manual (Page 92)

Appendix A Model 6400EH
Teledyne Analytical Instruments 80
COMMAND ADDITIONAL COMMAND SYNTAX DESCRIPTION
REPORT ["name"] [RECORDS=number]
[FROM=<start date>][TO=<end
date>] [VERBOSE | COM PACT| HEX] (Print
DAS records)(date format:
MM/DD/YYYY(or YY) [HH:MM:SS]
Print iDAS records
CANCEL Halt printing iDAS records
V [ID]
LIST Print setup variables
name[=value [warn_low [warn_high]]] Modify variable
name="value" Modify enumerated variable
CONFIG Print instrument configuration
MAINT ON|OFF Enter/exit maintenance mode
MODE Print current instrument mode
DASBEGIN [<data channel definitions>]
DASEND
Upload iDAS configuration
CHANNELBEGIN propertylist CHANNELEND Upload single iDAS channel
CHANNELDELETE ["name"] Delete iDAS channels
The command syntax follows the command type, separated by a
space character. Strings in [brackets] are optional designators. The
following key assignments also apply.
TERMINAL KEY ASSIGNMENTS
ESC Abort line
CR (ENTER) Execute command
Ctrl-C Switch to computer mode
COMPUTER MODE KEY ASSIGNMENTS
LF (line feed) Execute command
Ctrl-T Switch to terminal mode