Teledyne 6400EH - Sulfur Dioxide Analyzer - Manual (Page 78)

Appendix A Model 6400EH
Teledyne Analytical Instruments 66
SETUP VARIABLE
NUMERIC
UNITS
DEFAULT
VALUE
VALUE RANGE DESCRIPTION
PRESSURE,
SAMPLE
PRESSURE,
SAMPLE FLOW,
RCELL TEMP,
CHASSIS
TEMP,
PMT TEMP,
HVPS
VOLTAGE
REMOTE_CAL_MODE
— LOW LOW, HIGH
Range to calibrate during contact-
closure and Hessen calibration.
Enclose value in double quotes (“)
when setting
PASS_ENABLE — OFF OFF, ON
ON enables passwords; OFF
disables them.
STABIL_FREQ Seconds 10 1–300
Stability measurement sampling
period.
STABIL_SAMPLES Samples 25 2–40
Number of samples in concentration
stability reading.
RCELL CYCLE
_
Seconds 2 0.5–30
Reaction cell temperature control
cycle period.
RCELL_PROP 1/ºC
0.3
(prop. band
=
3 .3°C)
0-10
Reaction cell temperature PID
proportional coefficient.
RCELL INTEG
_
— 0.005 0–10
Reaction cell temperature PID
integral coefficient.
RCELL_DERIV
— 0.5 0–10
Reaction cell temperature PID
derivative coefficient.
HVPS_SET Volts
550
0–2000
High voltage power supply warning
limits. Set point is not used.
Warnings:
400–700
DETECTOR_LIMIT mV
1000
0–5000
UV lamp and PMT detector warning
limits. Set point is not used.
Warnings:
600-4995
SERIAL_NUMBER — “00000000"
Any character in
the allowed
character set.
Up to 100
characters long. Unique serial number for instrument.
Enclose value in double quotes (“)
when setting from the RS-232
interface.