Teledyne 6400EH - Sulfur Dioxide Analyzer - Manual (Page 77)

UV Fluorescence SO2 Analyzer Appendix A
Teledyne Analytical Instruments 65
SETUP VARIABLE
NUMERIC
UNITS
DEFAULT
VALUE
VALUE RANGE DESCRIPTION
512 = disable hardware FIFOs
1024 = enable RS-485 mode
2048 = even parity, 7 data bits,
1 stop bit
4096 = enable command prompt
BAUD_RATE — 19200
300,
1200, 2400,
4800, 9600,
19200, 38400,
57600, 115200
RS-232 COM1 baud rate.
Enclose value in double quotes (“)
when setting from the RS-232
interface.
MODEM_INIT —
“AT Y0 &D0
&H0 &I0
S0=2 &B0
&N6 &M0 E0
Q1 &W0”
Any character in
the allowed
character set.
Up to 100
characters long.
RS-232 COM 1 modem initialization
string. Sent verbatim plus carriage
return to modem on power up or
manually.
Enclose value in double quotes (“)
when setting from the RS-232
interface.
RS232_MODE2 BitFlag 0 0–65535
RS-232 COM2 mode flags. (Same
settings as RS232_MODE.)
BAUD_RATE2 — 19200
300, 1200,
2400, 4800,
9600, 19200,
38400, 57600,
115200
RS-232 COM2 baud rate. Enclose
value in double quotes (“) when
setting from the RS-232 interface.
MODEM_INIT2 —
“AT Y0 &D0
&H0 &I0
S0=2 &B0
&N6 &M0 E0
Q1 &W0”
Any character in
the allowed
character set.
Up to 100
characters long.
RS-232 COM2 modem initialization
string. Sent verbatim plus carriage
return to modem on power up or
manually.
Enclose value in double quotes (“)
when setting from the RS-232
interface.
RS232_PASS Password 940331 0–999999 RS-232 log on password.
MACHINE_ ID ID 100 0–9999 Unique ID number for instrument.
COMMAND_PROMPT — “Cmd> ”
Any character in
the allowed
character set.
Up to 100
characters long.
RS-232 interface command prompt.
Displayed only if enabled with
RS232 MODE variable.
Enclose value in double quotes (“)
when setting from the RS-232
interface.
TEST_CHAN_ID
— NONE
NONE,
PMT READING,
UV READING,
VACUUM
Diagnostic analog output ID.
Enclose value in double quotes (“)
when setting from the RS-232
interface.