Teledyne 6400EH - Sulfur Dioxide Analyzer - Manual (Page 39)

UV Fluorescence SO2 Analyzer Operating Instructions
Teledyne Analytical Instruments 27
Table 6-4: 6400EH Default Hessen Status Bit Assignments
STATUS FLAG NAME DEFAULT BIT ASSIGNMENT
WARNING FLAGS
SAMPLE FLOW WARNING 0001
PMT DET WARNING 0002
UV LAMP WARNING 0002
HVPS WARNING 0004
DARK CAL WARNING 0008
RCELL TEMP WARNING 0010
PMT TEMP WARNING 0040
INVALID CONC 0080
OPERATIONAL FLAGS
In Manual Calibration Mode 0200
In Zero Calibration Mode 0400
In Low Span Calibration Mode 0800
In Span Calibration Mode 0800
UNITS OF MEASURE FLAGS
UGM 1 0000
MGM 2000
PPB 1 4000
PPM 6000
SPARE/UNUSED BITS 0020, 0100, 8000
UNASSIGNED FLAGS
Box Temp Warning System Reset
Sample Press Warning Front Panel Warning
Vacuum Press Warning Analog Cal Warning
Rear Board Not Detected Cannot Dyn Zero
Relay Board Warning Cannot Dyn Span
1 Although assigned flags, these units are not available on the 6400EH