IAI America ACON-SE - Manual (Page 106)

96
6. T
roubleshooting
0EF Absolute encoder error (3) Cause: When the power was cut off, the current value changed at a
speed equal to or above the set value of rotational speed due
to an external factor, etc.
Action: Change the value set in the simple absolute unit and take an
appropriate action to prevent the actuator from moving at a
speed equal to or above the set speed.
If the battery backup time has enough allowance to do so,
increase the setting of motor speed.
5HIHUWR  ³3LDQR6ZLWFK6HWWLQJV´LQWKHRSHUDWLRQPDQXDOIRU\RXU
simple absolute unit.
If this error has generated, perform an absolute reset
DFFRUGLQJWRWKHVSHFLILHGSURFHGXUH ³+RZWR3HUIRUP
$EVROXWH5HVHW´