2 setting data in numeric specification mode – IAI America ACON-SE User Manual
Page 57
Advertising
![background image](/manuals/350310/57/background.png)
47
4. Description of Operating Functions
4.2 Setting Data in Numeric Specification Mode
If operation is performed in the numeric specification mode, the position table will become invalid. Set the data
related to operation (target position, speed, acceleration/deceleration, current-limiting value during push & hold
operation, positioning band, etc.) directly via serial communication.
For details, refer to the Gateway Unit Operation Manual and ROBO Cylinder Series Serial Communication
Operation Manual.
Advertising