Vanguard EZCT-S2A - Manual (Page 17)

REV 1 EZCT S2A USER’S MANUAL
13
h. The following screen will be displayed:
Type the serial number using the alpha-numeric keypad and then press the
[ENTER]
key.
i. The following screen will be displayed:
Enter any relevant comments using the alpha-numeric keypad and then press the
[ENTER]
key.
j. The following screen will be displayed:
Type the operator’s name using the alpha-numeric keypad and then press the [ENTER]
key. All header information will be saved, and you will be returned to the “START-UP”
menu.
OPERATOR:
TA
↑↓
TO POSITION
"enter" to accept
COMMENTS:
no comment
↑↓
TO POSITION
"enter" to accept
SERIAL NUMBER:
↑↓
TO POSITION
"enter" to accept