Vanguard EZCT-S2A User Manual
Page 42
![background image](/manuals/354189/42/background.png)
EZCT S2A USER’S MANUAL
REV 1
38
Continue with the steps below:
1. ERASE SINGLE REC.
Press the
[1]
key (ERASE SINGLE REC.) if you would like to erase a single record.
The following screen will be displayed:
Type the record number to be erased and press the
[ENTER]
key.
NOTES
• You can press the
[STOP]
key to cancel the process.
• If you do not know the record number, you can first print a test
record directory using the instructions in section 3.3.4.
The following screen will be displayed momentarily:
Then the following confirmation screen will be displayed:
Press any key to return to the “START-UP” menu.
Record number 1
Erased!
ERASING RECORD
NUMBER: 01
PLEASE WAIT...
ERASE RECORD
NUMBER:
ERASE RECORD
1.
ERASE SINGLE REC.
2.
ERASE ALL RECORDS