Vanguard EZCT-S2A User Manual
Page 79
REV 1 EZCT S2A USER’S MANUAL
75
4.3
Setting the Clock
To set the EZCT S2A’s internal clock:
a. Start from the “START-UP” menu:
Press the
[2]
key (SETUP).
b. The following screen will be displayed:
Press the
[6]
key (NEXT PAGE).
c. The following screen will be displayed:
Press the
[1]
key (SET TIME).
d. The following screen will be displayed:
Enter the month, date, time, hours, minutes, and seconds (in 24-hour format) using the
alpha-numeric keypad. When the last digit is entered, the clock will be set and you will
be returned to the “START-UP” menu.
ENTER
mm-dd-yy hh:mm:ss
_
1. SET TIME
2. buried ct in delta
3. knee point marker
4. print raw data
1.
RECORD ID
2.
PRINT RECORD
3.
RECORD DIRECTORY
4.
SAVE/RES RECORD
5.
ERASE RECORD
6. NEXT PAGE
1.
RUN TEST 02/16/10
2.
SETUP 10:24:25
3.
TEST PLANS
4.
DIAGNOSTIC