Vanguard EZCT-S2A - Manual (Page 83)

REV 1 EZCT S2A USER’S MANUAL
79
d. The following screen will be displayed and the V
x
, V
h
, and I
x
values will be continuously
updated for 15 seconds:
You can press the [PAPER ∧ Contrast] or [PAPER ∨ Contrast] key to increase or
decrease the V
x
voltage, respectively. You can press the [STOP] key to end the test
immediately and return to the “START-UP” menu.
The test will automatically end after 15 seconds, and you will be returned to the
“START-UP” menu.
DIAGNOSTIC
V x = 2.2
V H = 0.07
i x = 0.001A
↑↓
- "STOP" to exit