Vanguard EZCT-S2A User Manual
Page 80
EZCT S2A USER’S MANUAL
REV 1
76
4.4
Printing Raw Memory Buffer Data
You can print the raw data from the EZCT S2A’s memory buffer for diagnostic purposes. This
will print a table of current and voltage values from the last test performed as well as all stored
test records. To print the raw buffer data:
a. Start from the “START-UP” menu:
Press the
[2]
key (SETUP).
b. The following screen will be displayed:
Press the
[6]
key (NEXT PAGE).
c. The following screen will be displayed:
Press the
[4]
key (PRINT RAW DATA). The raw buffer data will be printed and you will be
returned to the “START-UP” menu. A sample printout is shown in Figure 14.
NOTE
You can press the
[STOP]
key at any time to abort the printing process.
1.
SET TIME
2.
buried ct in delta
3.
knee point marker
4.
print raw data
1.
RECORD ID
2.
PRINT RECORD
3.
RECORD DIRECTORY
4.
SAVE/RES RECORD
5.
ERASE RECORD
6. NEXT PAGE
1.
RUN TEST 02/16/10
2.
SETUP 10:24:25
3.
TEST PLANS
4.
DIAGNOSTIC