Vanguard EZCT-S2A - Manual (Page 45)

REV 1 EZCT S2A USER’S MANUAL
41
d. The following screen will be displayed:
1. ERASE SINGLE REC.
Press the
[1]
key (ERASE SINGLE REC.) if you would like to erase a single record.
The following screen will be displayed:
Type the record number to be erased and press the [ENTER] key.
NOTES
• You can press the [STOP]
key to cancel the process.
• If you do not know the record number, you can first print a test
record directory using the instructions in section Error!
Reference source not found..
The following screen will be displayed:
Press any key to continue. The following screen will be displayed:
ERASE RECORD
1. ERASE SINGLE REC.
2. ERASE ALL RECORDS
"STOP" TO EXIT
THUMB DRIVE REC_001
ERASED!
ERASE THUMB DRIVE
REC_
ERASE RECORD
1. ERASE SINGLE REC.
2. ERASE ALL RECORDS
"STOP" TO EXIT