Vanguard EZCT-S2A User Manual
Page 28
EZCT S2A USER’S MANUAL
REV 1
24
3.3
Working With Test Records
3.3.1. Restoring and Printing a Test Record From Flash EEPROM
You can restore a test record from the EZCT S2A’s Flash EEPROM to the working memory. You
can then print the restored test record on the unit’s built-in thermal printer. To restore a test
record:
a. Start from the “START-UP” menu:
Press the
[2]
key (SETUP).
b. The following screen will be displayed:
Press the
[4]
key (SAVE/RES RECORD).
c. The following screen will be displayed:
NOTE
If you have a USB Flash drive inserted in the EZCT S2A’s “USB MEM” port, the
following screen will be displayed instead of the above screen:
Press the
[1]
key (RESTORE RECORD).
The following screen will be displayed:
1.
RESTORE RECORD
2.
COPY TO THUMB DRIVE
RESTORE RECORD
1.
enter record number
2.
scroll to select
1.
RECORD ID
2.
PRINT RECORD
3.
RECORD DIRECTORY
4.
SAVE/RES RECORD
5.
ERASE RECORD
6. NEXT PAGE
1.
RUN TEST 02/16/10
2.
SETUP 10:24:25
3.
TEST PLANS
4.
DIAGNOSTIC