Vanguard EZCT-S2A - Manual (Page 59)

REV 1 EZCT S2A USER’S MANUAL
55
1. ERASE SINGLE PLAN
Press the
[1]
key (ERASE SINGLE PLAN) if you would like to erase a single plan
from the USB Flash drive. The following screen will be displayed:
Type the test plan number that you would like to erase and press the [ENTER]
key.
NOTES
• You can press the [STOP] key to cancel the process.
• If you do not know the test plan number, you can print a test
plan directory using the instructions in section 3.4.3.
The selected test plan will be erased and the following screen will be displayed:
Press any key to return to the “START-UP” menu.
2. ERASE ALL PLANS
Press the [2] key (ERASE ALL PLANS) if you would like to erase all the test plans
on the USB Flash drive. The following screen will be displayed:
If you would like to cancel the erasure process, press the
[STOP]
key. No test
plans will be erased and you will be returned to the “START-UP” menu.
Press the
[ENTER]
key to continue with the erasure process. The following
screen will be displayed while the test plans are being erased:
ERASE ALL thumb drive
test plans!
are you sure?
"ENTER" TO CONTINUE.
thumb drive plan_000
erased!
ERASE THUMB DRIVE
PLAN_