Vanguard EZCT-S2A - Manual (Page 32)

EZCT S2A USER’S MANUAL REV 1
28
The following screen will be displayed:
If you do not want to print the test record, press the [2] key (NO). The test record
will be restored to the working memory, and you will be returned to the “START-
UP” menu.
If you would like to print the test record, press the [1] key (YES). Continue to step d.
d. The following screen will be displayed:
Press the [1] key to print the tabulated data and graphics results on the thermal printer.
The test record will be restored to the working memory and will be printed on the
thermal printer, and then you will be returned to the “START-UP” menu.
Press the [2] key to print the test report and graphic results on the thermal printer,
without the excitation voltage and current data points. The test record will be restored
to the working memory and will be printed on the thermal printer, and then you will be
returned to the “START-UP” menu.
PRINT OPTIONS:
1. FULL DATA
2. ABBREVIATED data
RECORD RESTORED!
PRINT RECORD?
1. YES
2. NO