Vanguard EZCT-S2A - Manual (Page 20)

EZCT S2A USER’S MANUAL REV 1
16
Type the first number using the keypad.
You can press the [CLEAR] key to restart a field entry if necessary.
Press the
[ENTER]
key. The following screen will be displayed:
Type the second number using the keypad. The screen will be updated as shown:
Press the [ENTER] key. Continue to step h.
2. NO
Press the [2] key if you do not want to enter the CT nameplate values. Continue
to step h.
h. The following screen will be displayed:
Use the alpha-numeric keys on the keypad to enter a test note. The test note field is 20
characters long. One test note can be saved for each test.
ENTER TEST 1 NOTE:
_
↑↓
to position
"ENTER" TO ACCEPT
ENTER PLATE RATIO:
80 : 1.0
ENTER PLATE RATIO:
80 : 0.0
ENTER PLATE RATIO:
0 :