Vanguard EZCT-S2A User Manual
Page 34
![background image](/manuals/354189/34/background.png)
EZCT S2A USER’S MANUAL
REV 1
30
e. The following screen will be displayed:
Type the record number that you would like to restore and press the
[ENTER]
key. If
you do not know the record number, you can print a test record directory. Please see
section 3.3.4 for details
f. The following screen will be displayed while the record is being restored:
Once the record has been restored, the record’s graph will be displayed as shown
below:
Press any key to continue.
g. The following screen will be displayed:
If you do not want to print the test record, press the
[2]
key (NO). The test record will
be restored to the working memory, and you will be returned to the “START-UP” menu.
If you would like to print the test record, press the
[1]
key (YES). Continue to step h.
RECORd_001 RESTORED!
PRINT RECORD?
1. YES
2. NO
restoring thumb drive
REC_001
PLEASE WAIT...
RESTORE THUMB DRIVE
REC_