Vanguard EZCT-S2A User Manual
Page 33
REV 1 EZCT S2A USER’S MANUAL
29
3.3.2. Restoring and Printing a Test Record From a USB Flash Drive
You can restore a test record from a USB Flash drive to the EZCT S2A’s working memory using
the steps below:
a. Make sure the USB Flash drive containing the test record(s) is inserted in the EZCT S2A’s
USB Flash drive port (“USB MEM” port). Then start from the “START-UP” menu:
Press the
[2]
key (SETUP).
b. The following screen will be displayed:
Press the
[4]
key (SAVE/RES RECORD).
c. The following screen will be displayed:
Press the
[1]
key (RESTORE RECORD).
d. The following screen will be displayed:
Press the
[2]
key (THUMB DRIVE).
1.
INTERNAL STORAGE
2.
THUMB DRIVE
1.
RESTORE RECORD
2.
COPY TO THUMB DRIVE
1.
RECORD ID
2.
PRINT RECORD
3.
RECORD DIRECTORY
4.
SAVE/RES RECORD
5.
ERASE RECORD
6.
NEXT PAGE
1.
RUN TEST 02/14/10
2.
SETUP 07:39:39
3.
TEST PLANS
4.
DIAGNOSTIC