Vanguard EZCT-S2A - Manual (Page 29)

REV 1 EZCT S2A USER’S MANUAL
25
Press the [1] key (INTERNAL STORAGE).
The following screen will then be displayed:
Continue with the steps below.
1. ENTER RECORD NUMBER
If you know the record number that you would like to restore, press the
[1]
key.
The following screen will be displayed:
Type the record number using the alpha-numeric keypad and then press the
[ENTER]
key. The test record’s graph will be displayed as shown below:
Press any key to continue.
RESTORE RECORD
NUMBER:
RESTORE RECORD
1. enter record number
2. scroll to select
1. INTERNAL STORAGE
2. THUMB DRIVE