Vanguard EZCT-S2A - Manual (Page 64)

EZCT S2A USER’S MANUAL REV 1
60
e. The following screen will be displayed:
1. YES
Press the
[1]
key if you would like the loaded test plan to be also saved in the
EZCT S2A’s Flash EEPROM. Any existing test plans in the EZCT S2A’s Flash
EEPROM will not be over-written. The EZCT S2A will automatically assign a new
test plan number and store the test plan in the next available memory location.
The following screen will be displayed:
Press any key to return to the “START-UP” menu.
2. NO
Press the [2] key if you do not want to save the loaded test plan in the EZCT
S2A’s Flash EEPROM. It will be loaded into the working memory, and you will be
returned to the “START-UP” menu.
test plan xxx saved!
PLAN_000 loaded!
save plan internally?
1. YES
2. NO