Vanguard EZCT-S2A User Manual
Page 72
EZCT S2A USER’S MANUAL
REV 1
68
d. The following screen will be displayed:
Press either the
[1]
key (IEEE 30 DEGREE), the
[2]
key (IEEE 45 DEGREE), or the
[3]
key
(IEC 10%V-->50%I) to select the desired knee point marker. The knee point marker will
be set and you will be returned to the “START-UP” menu. A graphic report showing the
knee point marker is shown in Figure 11.
NOTE
If a test record is loaded in the current working memory, the following screen
will be displayed:
Press the
[1]
key (YES) to save the test record with the updated knee point
marker setting.
Press the
[2]
key (NO) if you do not want to update the saved test record.
KNEE TYPE CHANGED
SAVE RECORD?
1. YES
2. NO
1.
IEEE 30 DEGREE
2.
IEEE 45 DEGREE
3.
IEC 10
%V-->50%I