Vanguard EZCT-S2A - Manual (Page 48)

EZCT S2A USER’S MANUAL REV 1
44
NOTES
• Option 7 (COPY TO THUMB DRIVE) will be listed only if a USB Flash drive is
connected to the EZCT S2A’s “USB MEM” port.
• If there is no test record in the working memory, the following screen will be
displayed:
Press any key to return to the “START-UP” menu. You must first restore a
test record to the working memory before a test plan can be extracted.
Please see section 3.3.1
Press the [4] key (EXTRACT TEST PLAN)
d. The following screen will be displayed:
The test plan will be extracted from the test record in the working memory and will be
saved to the EZCT S2A’s Flash EEPROM as a new test plan. The test plan number will be
automatically incremented by the EZCT S2A.
Press any key to return to the “START-UP” menu.
TEST PLAN NUMBER 1
has been saved!
NO RECORD LOADED!