Vanguard EZCT-S2A - Manual (Page 67)

REV 1 EZCT S2A USER’S MANUAL
63
c. The following screen will be displayed:
Press the [ENTER] key.
d. The following screen will be displayed:
Use the alpha-numeric keys on the keypad to enter a test note and press the [ENTER]
key.
e. The following confirmation screen will be displayed showing the test parameters:
Press the [START] key to begin the test.
f. The EZCT S2A will start performing the test per the test plan parameters. When the test
has finished, the following screen will be displayed:
Press any key to continue.
ANY KEY TO CONTINUE
V
x
=77.6 V
H
=0.3876
I=0.0522 RAT=+200.08
TEST 1 parameters:
1500V
1.0A x1-x2
"START" to begin
ENTER TEST 1 NOTE:
_
↑↓
to position
"ENTER" TO ACCEPT
HOOK CABLES TO CT:
X1 CABLE TO CT-X1
X2 CABLE TO CT-X2
"ENTER" TO CONTINUE