Vanguard EZCT-S2A User Manual
Page 66
EZCT S2A USER’S MANUAL
REV 1
62
Press the
[ENTER]
key and the EZCT S2A will start running the test per the test
plan settings. The screen will be updated with the test status.
When the test has finished, the following screen will be displayed:
Press the
[1]
key (YES) to save the record.
The following screen will be displayed momentarily:
Then the following confirmation screen will be displayed:
Press any key to return to the “START-UP” menu.
3. UNLOAD TEST PLAN
Press the
[3]
key to unload the test plan and run a test without a test plan. This
will unload the test plan from the working memory and bring up the standard
“RUN TEST” menu. Please see section 3.2.2, step b.
RECORD NUMBER 2
has been saved!
SAVING RECORD...
PLEASE WAIT...
SAVE THIS RECORD?
1. YES
2. NO
HOOK CABLES TO CT:
X1 CABLE TO CT-X1
X2 CABLE TO CT-X2
"ENTER" TO CONTINUE