7 layer edit menu – INFICON SQC-310 Thin Film Deposition Controller User Manual
Page 50
3 - 8
IP
N 07
4-
55
0-
P1
B
SQC-310 Operating Manual
3.7 Layer Edit Menu
Each layer consists of a film, plus the rate, thickness, and a few other parameters
needed for the layer. The Layer Edit Menu provides access to these layer
parameters. See
Figure 3-5 Layer Edit Menu
Edit
Displays the Layer Edit Menu for the highlighted layer (see the next
section).
Insert New . . .
Shows the list of 50 films. Select a film, then press Insert Normal or
Insert CoDep to insert the film as a new layer.
Copy/Paste
Used to develop the sequence of layers in a process.
Copies the highlighted layer, which can then by pasted or inserted.
Pasting overwrites the highlighted layer. After copying, Insert also
becomes available. Insert pastes the layer in front of the highlighted
layer, see
section 3.8, Layer Copy, Insert and Delete Menus, on
Table 3-6 Layer Select Menu SoftKeys (continued)