2 source setup, Section 3.11.3.2, Caution – INFICON SQC-310 Thin Film Deposition Controller User Manual
Page 76
Advertising
3 - 34
IP
N 07
4-
55
0-
P1
B
SQC-310 Operating Manual
3.11.3.2 Source Setup
Source setup parameters are identical to the sensor setup parameters, with one
exception.
Voltage Scale: Sets the maximum output voltage for the source power supply
input. Voltages from –10 V to +10 V are possible. Your power supply manual will
state the required input voltage, typically 10 V, 5 V, -10 V, or –5 V.
CAUTION
If changes are made in the Logic Menu, be sure to exit to
the System Menu or Main Screen before powering down.
Your changes will not be saved otherwise.
Advertising