Lenze E84AVSCx 8400 StateLine C - Manual (Page 4)

1 About this documentation
4
Lenze · 8400 StateLine · Operating instructions · from Firmware V06.00 · DMS 1.2 EN · 12/2012 · TD05
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
1 About this documentation
This documentation applies to the 8400 StateLine C controller with the following nameplate data:
• The documentation contains important technical information on how to commission and
operate the 8400 StateLine C controller.
• The documentation applies to the "simple" "speed-controlled" operation preset by Lenze by
default. The most important settings for commissioning will be explained so that many
applications using the 8400 StateLine C controller and the preset application "actuating drive
speed" can be solved quickly.
• The documentation supplements the mounting instructions, the hardware manual and the
reference manual for the 8400 StateLine C controller.
• The hardware and reference manual are included in the scope of supply. in electronic format.
Definition of the notes used
The following signal words and symbols are used in this documentation to indicate dangers and
important information:
Product range Type designation from software version
8400 StateLine C E84AVSCxxxxx 06.00
Symbol Signal word Meaning
 Danger! Danger of personal injury through dangerous electrical voltage
Reference to an imminent danger that may result in death or serious personal injury
if the corresponding measures are not taken.
 Danger! Danger of personal injury through a general source of danger
Reference to an imminent danger that may result in death or serious personal injury
if the corresponding measures are not taken.
 Stop! Danger of property damage
Reference to a possible danger that may result in property damage if the
corresponding measures are not taken.
 Note! Important note to ensure trouble-free operation