Lenze E84AVSCx 8400 StateLine C - Manual (Page 5)

Lenze · 8400 StateLine · Operating instructions · from Firmware V06.00 · DMS 1.2 EN · 12/2012 · TD05
5
2 Safety instructions
2.1 General safety and application notes for Lenze controllers
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
2 Safety instructions
2.1 General safety and application notes for Lenze controllers
(according to Low-Voltage Directive 2006/95/EG)
For your personal safety
Disregarding the following safety measures can lead to severe
injury to persons and damage to material assets:
• Only use the product as directed.
• Never commission the product in the event of visible damage.
• Never commission the product before assembly has been
completed.
• Do not carry out any technical changes on the product.
• Only use the accessories approved for the product.
• Only use original spare parts from Lenze.
• Observe all regulations for the prevention of accidents,
directives and laws applicable on site.
• Transport, installation, commissioning and maintenance
work must only be carried out by qualified personnel.
–Observe IEC 364 and CENELEC HD 384 or DIN VDE 0100 and
IEC report 664 or DIN VDE 0110 and all national regulations
for the prevention of accidents.
–According to this basic safety information, qualified, skilled
personnel are persons who are familiar with the assembly,
installation, commissioning, and operation of the product
and who have the qualifications necessary for their
occupation.
• Observe all specifications in this documentation.
–This is the condition for safe and trouble-free operation and
the achievement of the specified product features.
–The procedural notes and circuit details described in this
documentation are only proposals. It's up to the user to
check whether they can be transferred to the particular
applications. Lenze Drives GmbH does not accept any
liability for the suitability of the procedures and circuit
proposals described.
• Depending on their degree of protection, some parts of the
Lenze controllers (frequency inverters, servo inverters, DC
speed controllers) and their accessory components can be
live, moving and rotating during operation. Surfaces can be
hot.
–Non-authorised removal of the required cover,
inappropriate use, incorrect installation or operation,
creates the risk of severe injury to persons or damage to
material assets.
–For more information, please see the documentation.
• High amounts of energy are produced in the controller.
Therefore it is required to wear personal protective
equipment (body protection, headgear, eye protection, ear
protection, hand guard).

Danger!
Sticker with warning note must be displayed prominently and close to the device!
Description of the warning signs 
 Long discharge time!
All power terminals remain live for some minutes after mains disconnection!
The time is given below the warning symbol on the device.
 High leakage current!
Carry out fixed installation and PE connection in accordance with EN 61800-5-1!
 Electrostatic sensitive devices!
Before working on the device, the staff must ensure to be free of electrostatic charge!
 Hot surface!
Risk of burns!
Hot surfaces should not be touched without wearing protective gloves.