3 "speed control" mode, 1 speed setpoint, Speed control" mode – Lenze 931K User Manual
Page 47: Speed setpoint, Parameter setting
Advertising
Parameter setting
"Speed control" mode
Speed setpoint
l
47
KHB 13.0004−EN 2.1
7.3
"Speed control" mode
7.3.1
Speed setpoint
ƒ
Setting the speed setpoint.
In the "speed control" mode the "speed setpoint" selector is selected automatically.
PNU
Name
Possible settings
Characteristics
Lenze
Selection
Description
1010
0 Target Velocity
0
0
{1 rpm}
6000
Ċ
INT32
RW
Ċ
Selection of the speed
setpoint.
l
If the speed control mode
is selected in SDC, the
selector under "setpoint
selection" changes over if
required: AIN0/1, Profibus
or RS232
Advertising
This manual is related to the following products: