Lenze EVF9333 - Manual (Page 183)

Electrical installation
Standard devices in the power range of 55 kW
Important notes
5
l
183 EDKVF9333V DE/EN/FR 7.1
5.6 Standard devices in the power range of 55 kW
5.6.1 Important notes
To gain access to the power connections, remove the cover:
Remove the cover of the drive controller
0
1
1. Remove the screws 0
2. Lift cover 1 up and detach it
9300vec113
Installation material required from the scope of supply:
Description Use Quantity
Cable ties 3.5 × 150 mm Strain relief/shield connection for motor cable 4
5.6.2 Mains connection, DC supply
)
Note!
ƒ If a mains filter or RFI filter is used and the cable length between mains/RFI
filter and drive controller exceeds 300 mm, install a shielded cable.
ƒ For DC−bus operation or DC supply, we recommend using shielded DC
cables.