Lenze E94AxHE Servo Drives 9400 HighLine (Firmware 01-37) - Manual (Page 2)

2 DMS-Version 1.6 EN - 09/2006 - TD05/TD14/TD19
L
Copyright
© 2006 Lenze Drive Systems GmbH. All rights reserved.
Imprint
Lenze Drive Systems GmbH
Postfach 10 13 52, 31763 Hameln, Germany
Phone: ++49 (0)5154 / 82-0
Fax: ++49 (0)5154 / 82-2111
E-mail: [email protected]
Copyright information
All texts, photos and graphics contained in this documentation are subject to
copyright protection. No part of this documentation may be copied or made
available to third parties without the explicit written approval of Lenze Drive
Systems GmbH.
Liability
All information given in this documentation has been carefully selected and
tested for compliance with the hardware and software described.
Nevertheless, discrepancies cannot be ruled out. We do not accept any
responsibility or liability for any damage that may occur. Required correction
will be included in updates of this documentation.
Depending on the software version of the controller, the screenshots in this
documentation may differ from the »Engineer« representation.