Lenze E94AxHE Servo Drives 9400 HighLine (Firmware 01-37) - Manual (Page 64)

9400 HighLine | Parameter setting & configuration
Motor interface
64 Firmware 1.37 - 09/2006
L
5 Motor interface
This chapter contains information on initial commissioning of the motor and parameter
setting of the internal motor control of the controller.
See also: Speed follower (C 190)
Torque follower (C 196)
Position follower (C 183)
Encoder evaluation (C 108)
Note!
To select application-specific setpoints, the motor interface can be extended by
appropriate interfaces using the basic functions " Speed follower ", " Torque
follower " and " Position follower ".
The application-specific conditioning of the encoder signals is executed with the
basic function " Encoder evaluation ".