Lenze E94AxHE Servo Drives 9400 HighLine (Firmware 01-37) - Manual (Page 252)

9400 HighLine | Parameter setting & configuration
Standard TAs
TA "Actuator – speed" | Speed setpoint conditioning
252 Firmware 1.37 - 09/2006
L
11.2.4.2 Setpoint inversion
[11-6] Setpoint inversion (schematic diagram)
Via the digital input DI3 the effective direction of the (bipolar) setpoint can be inverted, if
required.
r Parameter setting: Application parameter tab dialog level Overview  Ramp
generator
Gain Invert setpoint Selection LS_Speed...
M
Speed
setpoint
DI2 DI3 DI4
OUT
IN
Ramp generator
% 1
% 2
% 15
Fixed setpoints
Status
machine
(basic drive
functions)
Speed setpoint
AIN1
M
v
Control inputs of the function Signal configuration
Lenze setting Control input (Multiplexer parameters)
DigIn 3  Invert direction of rotation C03009/1