Lenze E94AxHE Servo Drives 9400 HighLine (Firmware 01-37) - Manual (Page 441)

L
Firmware 1.37 - 09/2006 441
9400 HighLine | Parameter setting & configuration
Diagnostics & error analysis
Monitoring
Warning thresholds
Some of the monitoring functions are activated if a defined warning threshold (e.g.
temperature) have been exceeded.
r The corresponding preset threshold values can be changed via the following
parameters:
Parameters Information
C00120 Motor overload protection (I²xt)
C00121 Warning threshold - motor temperature
C00122 Warning threshold - heatsink temperature
C00123 Warning threshold - device utilisation
C00126 Warning threshold - CPU temperature
C00127 Warning threshold - motor overload
C00128 Thermal motor time constant
C00132 Max. temperature of brake resistor
C00174 Undervoltage (LU) threshold
C00185 Threshold - mains recovery recognition
C00576 Window - speed monitoring
C00596 Threshold of maximum speed reached
C00599 Threshold - motor phase failure
C00620 Max. motor current threshold