MacDon FD70 for Combine Operators User Manual

Page 151

Advertising
background image

SECTION 10. MAINTENANCE AND SERVICING

Form 169006

149

Revision D

10.5.5.3

Changing Gearbox Lubricant

NOTE

Change main drive gearbox lubricant
after the first 50 hours of operation and
every 1000 hours (or 3 years)
thereafter.

a. Raise or lower header to position oil drain plug

(F) at its lowest point.

b. Place a suitable container (approximately one

US gallon (4 liters)) under gearbox drain to collect
oil.

c. Remove drain plug (F) and filler plug (E), and

allow oil to drain.

d. Replace drain plug (F), and remove oil level plug

(D).

e. Add SAE 85W140 oil at (E) until it runs out of

hole at (D). Gearbox holds approximately 5 US
pints (2.5 liters).

f.

Replace oil level plug (D) and filler plug (E).

E

D

F

Advertising
This manual is related to the following products: