MacDon FD70 for Combine Operators - Manual (Page 51)

SECTION 7.6 CAT LEXION 400, 500 SERIES
Form 169006
49
Revision D
g. Connect hydraulic hoses as follows:
Lexion 500 Attachment
1. Unscrew knob (F) on combine coupler (G) to
release coupler from combine receptacle (H).
2. Remove cover (J) from adapter receptacle.
3. Clean mating surface of coupler (G), and
locate onto adapter receptacle. Turn knob
(F) to secure coupler to receptacle.
4. Place cover (J) on combine receptacle.
5. Proceed to step h. on next page.
Lexion 400 Attachment
1. Unscrew knob (L) on combine coupler (M) to
release coupler from combine receptacle.
2. Remove cover (N) from adapter receptacle,
and place on combine receptacle (O).
3. Locate combine coupler (M) onto adapter
receptacle (P), and turn knob (L) to secure
coupler to receptacle.
(continued next page)
F
G
H
M
L
P
M
L
N
O
N
J
G
F
J