MacDon FD70 for Combine Operators - Manual (Page 35)

SECTION 7.2 CASE IH 7010, 8010, 7120, 8120, 88 SERIES
Form 169006
33
Revision D
d. Remove electrical connector (E), and replace
cover.
e. Push in lock button (F), and pull handle (G) to
release coupler (H). Position coupler (H) onto
storage plate (J) on combine.
f.
Place electrical connector (E) in storage cup on
plate (J)
g.
h. Push handle (G) to “closed position” until lock
button (F) snaps out. Close cover (K).
i. Lift lever (L), pull and lower handle (M) to
disengage feeder house/adapter lock (N).
j. Lower feeder house until it disengages adapter
support.
k. Slowly back combine away from adapter.
H
E
J
K
F
G
F
E
H
G
M
L
N