MacDon FD70 for Combine Operators - Manual (Page 40)

SECTION 7.3 CASE IH 2300, 2500 SERIES
Form 169006
38
Revision D
h. If adapter is equipped with reel fore-aft/header tilt
selector, disconnect harness (H), and store on
combine.
i. Disconnect hydraulics as follows:
1. Disconnect reel drive hoses (J) and (K)
(white discs) from adapter and combine
receptacles.
2. Connect hose (J) from combine to combine
coupler (M).
3. Connect hose (K) from the adapter to the
adapter coupler (O).
4. Disconnect reel lift hose (P) (black disc) on
combine, and attach red dust cap. Store
hose on adapter.
CAUTION
Do not connect reel lift hose and reel fore-aft
hose to couplers on adapter. Doing so may
cause reel to inadvertently shift during
transport.
(continued next page)
O
K
H
K
J
M
J
P
P