MacDon FD70 for Combine Operators - Manual (Page 160)

SECTION 10. MAINTENANCE AND SERVICING
Form 169006
158
Revision D
d. Rotate guard locking ring (H) counter clockwise
with a screwdriver until lugs (J) line up with slots
in guard.
e. Pull guard off driveline.
f. Repeat above steps c. to e. for other driveline
guard.
10.8.4 Guard Installation
a. Slide guard onto driveline, and line up slotted lug
on locking ring (A) with arrow (B) on guard.
b. Push guard onto ring until locking ring is visible in
slots (C).
c. Rotate ring (D) clockwise with a screwdriver to
lock ring in guard.
d. Push grease zerk (E) back into guard.
e. Repeat steps a. to d. for other guard.
(continued next page)
C
A
B
D
E
H
J