MacDon FD70 for Combine Operators - Manual (Page 206)

SECTION 10. MAINTENANCE AND SERVICING
Form 169006
204
Revision D
10.14.11 Reel Drive Motor: D50
DANGER
To avoid bodily injury from fall of raised reel,
always engage reel props before going under
raised reel for any reason.
10.14.11.1 Removal: Drive Motor
a. Lower header, raise reel, and engage reel props.
b. Remove reel drive cover. Refer to Section
10.14.6 Reel Drive Chain: D50.
c. Loosen chain (A), and remove drive sprocket (B).
Refer to Section 10.14.8 Reel Drive Sprocket:
D50.
d. Disconnect hydraulic lines (C) at motor fittings.
Cap or plug open ports and lines.
e. Remove the four nuts and bolts (D), and remove
motor.
10.14.11.2 Installation: Drive Motor
Refer to illustrations opposite.
a. Position hydraulic motor on motor mount, and
install four countersunk bolts (D). Torque to
75 ft·lbf (102 N·m).
b. Re-attach hydraulic lines (C) to motor.
c. Install sprocket (B) and chain (A). Refer to
Section 10.14.8 Reel Drive Sprocket: D50.
d. Re-attach reel drive cover. Refer to Section
10.14.6 Reel Drive Chain: D50.
D
C
A
B
D