MacDon FD70 for Combine Operators - Manual (Page 23)

SECTION 3. SAFETY
Form 169006
21
Revision D
 Use only service and repair parts made or
approved by the equipment manufacturer.
Substituted parts may not meet strength,
design, or safety requirements.
 Do not modify the machine. Unauthorized
modifications may impair the function
and/or safety and affect machine life.
 Stop engine, and remove key from
ignition before leaving Operator's seat for
any reason. A child or even a pet could
engage an idling machine.
 Keep the area used for servicing
machinery clean and dry. Wet or oily
floors are slippery. Wet spots can be
dangerous when working with electrical
equipment. Be sure all electrical outlets
and tools are properly grounded.
 Use adequate light for the job at hand.
 Keep machinery clean. Straw and chaff on
a hot engine are a fire hazard. Do not
allow oil or grease to accumulate on
service platforms, ladders or controls.
Clean machines before storage.
 Never use gasoline, naphtha or any
volatile material for cleaning purposes.
These materials may be toxic and/or
flammable.
 When storing machinery, cover sharp or
extending components to prevent injury
from accidental contact.