MacDon FD70 for Combine Operators - Manual (Page 52)

SECTION 7.6 CAT LEXION 400, 500 SERIES
Form 169006
50
Revision D
4. Disconnect hoses (Q) and (R) on combine at
couplers.
5. Clean couplers (S) and (T) on adapter.
6. Connect hose (R) to coupler (S) on adapter.
7. Connect hose (Q) to coupler (T) on adapter.
h. If adapter is equipped with reel fore-aft/header tilt
selector, connect harness (U) to combine harness
(V). (shown in previous column).
i. Rotate disc (W) on adapter driveline storage
hook, and remove driveline from hook.
j. Attach driveline to combine output shaft (X).
k. Disengage both adapter float locks by moving
latch (Y) away from adapter, and moving lever (Z)
at each lock to “lowest position”.
T
S
U
V
Z
LOCK
UNLOCK
Y
X
W
R
Q