MacDon FD70 for Combine Operators - Manual (Page 85)

SECTION 9. OPERATION
Form 169006
83
Revision D
c. At the center reel arm on double reel headers,
move lock (C) to inboard position to engage pin
(D) under prop.
d. Lower reel until props contact end frames.
e. To disengage reel props, raise reel, push outside
arm props (A) back against reel arm.
f. For double reel headers, move lock (C) to
outboard position.
D50 Header
a. Raise reel to maximum height.
b. Move props (A) to engaged position.
c. Lower reel until props contact end frames.
NOTE:
Keep pivot bolt (B) properly tightened
so prop remains in stored position when
not in use, yet can be engaged with
hand force.
d. To disengage reel props, raise reel, push arm
props (A) back against reel arm.
B
A
D60 HARVEST HEADER
FD70 FLEXDRAPER
D
C
C