MacDon FD70 for Combine Operators User Manual
Page 28
SECTION 6. SPECIFICATIONS
Form 169006
26
Revision D
HEADER MODEL
D60
D50 / D60
D50 / D60 / FD70
D60 / FD70 D60 / FD70
HEADER SIZE
20 FT
25 FT
30 FT
35 FT
40 FT
45 FT
REEL
Drive
Hydraulic From Combine Hydraulic Oil Supply
Speed
0 - 67 rpm
Quantity of Tine Tubes
6 / 9
5 / 6 / 9
5 / 6
5
Effective Reel Diameter
65 in. (1650 mm)
Finger Tip Radius Range
30.2 - 31.5 in. (766 - 800 mm)
Finger Type
Plastic
--- Standard
Heavy Duty Plastic
Std.
Optional D60 & 30 FT FD70
Opt. D60 DK
---
Finger Spacing
6.0 in. (152.4 mm)
UPPER CROSS AUGER
Outside Diameter
12 in. (305 mm)
Weight (lb (kg))
163 (74)
192 (87)
221 (100)
250 (113)
279 (127)
308 (140)
STABILIZER WHEELS
Size
Not Applicable
ST205 / 75R-15
Pressure
Load Range E - 80 psi (552 kPa)
Load Range D - 65 psi (448 kPa)
Weight
200 lb (91 kg)
COMBINE ADAPTER
Width
151 inches (3835 mm)
Length
70 inches (1778 mm)
Height
50 inches (1270 mm)
Weight
2050 lb (930 kg)
Main Drive
Combine Driven Piston Pump and Gear Pump Through Gearbox
Gearbox Capacity
5 Pints (2.5 liters)
Auger
Drive
Chain
Type
Auger - 14 inches (356 mm) with
4 inch (102 mm) Flighting
Speed
150 rpm (Combine Dependent)
Feed Draper
Drive
Hydraulic Motor from Combine Driven Pump
Type
Self-Tracking Rubber Coated Polyester Fabric With Rubber Slats
Width
78.7 inches (2000 mm)
Speed
350 - 400 ft / min (107 - 122 meters / min)
Reservoir Capacity
16 U.S. gal (60 liters)
Maximum Operating Pressure
3500 psi (24132 kPa) Piston Pump, 3700 psi (25510 kPa) Gear Pump
Filter
10 micron #151975
Header Draper Drive Pump
1.01 in.
3
(16.5 cc) Gear Pump
Sickle Drive Pump
1.8 - 2.7 in.
3
(29.5 - 44.2 cc) Piston Pump
Adapter Header Flotation
7 - 8 Inches (178 - 203 mm) Vertical, 4 Degrees Rotation
Header Angle Control
Mechanical or
Hydraulic From Combine Hydraulic Oil Supply
(With Solenoid Valve To Toggle To Reel Fore-aft / Header Tilt)
Combine Requirement
Class 5 or Higher
NOTES:
1. Specifications and design are subject to change without notice or obligation to revise previously sold units.
2. Weights do not include options.