MacDon FD70 for Combine Operators - Manual (Page 64)

SECTION 7.8 AGCO
Form 169006
62
Revision D
ALL EXCEPT GLEANER ‘R’ SERIES
K
GLEANER ‘R’ SERIES
J
K
e. Disconnect hydraulic/electrical coupler from
combine as follows:
1. Move handle (F) to “full open position” to
release coupler from combine.
2. Lift handle (G) on adapter, position coupler
(H) in adapter, and lower handle (G) to lock
coupler.
f. Retract lugs (J) at base of feeder-house with lock
handle (K).
g. Lower feeder house until saddle (L) disengages
and clears adapter support (M).
h. Slowly back combine away from adapter.
F
H
G
M
L