Register the eds file, Select add to register a new device – Rockwell Automation 193-ETN E1 Plus EtherNet Side Mount Module User Manual User Manual
Page 28
Advertising
28
Rockwell Automation Publication 193-UM012B-EN-P - June 2011
Chapter 3
2.
Select the network type as EtherNet/IP and select Search.
3.
Locate the EDS file for the E1 Plus EtherNet/IP Side Mount Module and
download it to the personal computer.
Register the EDS File
After the EDS file has been downloaded, a user will need to register the EDS file
with the software that configures the EtherNet/IP network. The following
example lists the steps needed to register an EDS file with Rockwell Software’s
RSLinx Classic software.
1.
Start the EDS Hardware Installation Tool, located at Start->Programs-
>Rockwell Software->RSLinx Tools.
2.
Select Add to register a new device.
Advertising